Antec Performance 1 FT (E-ATX) Full Tower Cabinet (Black)

Antec Performance 1 FT is a full tower E-ATX PC Cabinet. Both side panels adopt tempered glass for better PC showcase visual effects. The temperature display can be switched from CPU temperature to GPU temperature or turned off via the switch button.

Features:

SYSTEM STATUS WITH A GLANCE
Temperature Display

By pressing the switch button on the I/O panel, users can glance at the temperature of the CPU and GPU on the temperature display.

The temperature display can be switched from CPU temperature to GPU temperature or turned off via the switch button.

Attention: The Antec iUnity software must be installed.

ANTEC iUnity

The Antec iUnity provides instant data on PC specs, loads, and usage.

I/O Panel

• Including the mainstream Type-C(10Gbps) port for high-speed transfer
• Included dust plugs for dust prevention.
• Mic/Audio 2-in-1 port.

4mm Tempered Glass Side Panel

Both side panels adopt tempered glass for better PC showcase visual effects.

Cable Management on Point

2 cable covers are included for beautifying the cable management area.

There are ten sets of velcro straps for easy cable management.

• Three sets of velcro straps for fan & I/O cable routing.
• Five velcro straps for hardware and power supply cables.
• Two velcro straps at the rear for rear I/O cable routing.

PRE-INSTALLED 4 FANS OF 30MM THICKNESS
Storm T3 PWM Fan

• 3 x Storm T3 140mm PWM Fans at the Front.
• 1 x Storm T3 120mm PWM Fan at the Rear.

COOLING COMPATIBILITY
Storm T3 PWM Fan

The Storm T3 Fan of 30mm thickness comes with thicker and longer fan blades, efficiently increasing the air intake.

The PWM function easily reaches the balance between cooling and silence.

BEST DUST PREVENTION DESIGN
Exquisite Steel Mesh

The mesh front panel adopts the 1.2mm vent holes and the magnetic & clip-on design with easy access.

Best Airflow Path for GPU Cooling

Airflow-enhancing mesh front panel provides massive air.

Ample mesh at the bottom with fans (optional) on the meshed PSU shroud provides the best performance for the GPU cooling

• Top: Magnetic dust filter.
• Front: Magnetic & clip-on dust filter.
• Bottom: Full-sized pull-out dust filter.

Supports RTX 40 Series Graphics Cards

Full-tower PC case in 230mm width supports the up-to-date 40 Series GPUs and high-end PC components.

Best Cooling Design

• Support a 420mm radiator at the front. (When installing a 420mm radiator at the front, the radiator at the top must be less than 360mm.)
• Supports 360mm radiators at the front and top simultaneously.
• Up to 10 fans simultaneously.

Modular Drive Trays

Supports up to 5 drives: 2 removable drive trays for 3.5″ HDD/2.5″ SSD & 3 drive trays for 2.5″ SSD.

Specification: